About Us

Products

Contact Us

Call us Today at 812-522-4460
Combustion Air
 
Heat Exchangers
 
Pumps
EngineAir, Inc.
927 N. Shields Ave.
Seymour, IN  47274
Phone:  812-522-4460
Fax:  812-523-6186
Copyright 2007, EngineAir, Inc.          Webmaster:

ABOUT US

PRODUCTS

CONTACT US

HOME

 Jerry Ousley Webs
Products > Heat Exchangers
GE Intercooler
Part Number: 128 x 1649-8 Right Bank
Part Number: 128 x 1650-8 Left Bank
Part Number: 128 x 1692-9 Right Bank
Part Number: 128 x 1693-9 Left Bank

GE Intercooler cores are remanufactured by first completely cleaning the unit. The next step includes visually inspecting the unit for leaks while applying pressure to the core. All identified leaking tubes are mechanically sealed. If the number of sealed tubes exceeds the OEM standard for the maximum allowable number, a replacement center section is offered in the remanufacturing process. Upon completion of either process, a final pressure check is done. The intercooler is then completely dried, painted, wrapped and skidded for shipment.
EMD Aftercooler
Part Number: 40020885 12 row, 4 pass

EMD Aftercooler cores are remanufactured by first completely cleaning the unit then visually inspecting the unit for leaks while applying pressure to the core. All identified leaking tubes are mechanically sealed. If the number of leaking tubes exceeds the OEM maximum, the "core" can be replaced. Upon completion of either process, a final pressure check is done. The aftercooler is then completely dried, painted, wrapped and skidded for shipment.
GE Radiator
Part Number: 41D711033G10 (GE 31" HEIGHT CORE)

84D701689P1 / 41D12040G4 (GE 42" HEIGHT CORE)

GE Radiators are remanufactured by first visually inspecting the unit for leaks while applying pressure to the core. After a complete cleaning, all identified leaking tubes are mechanically sealed. If the number of sealed tubes exceeds the OEM standard for the maximum allowable, a replacement radiator section is offered in the remanufacturing process. Upon completion of either process, a final pressure check is made. The radiator is then completely dried, painted, cardboard wrapped and skidded for shipment.
EMD Radiator
Part Number:
9526642 (6" single section, mechanical bond)

EMD Radiator are remanufactured by first completely cleaning and visually inspecting the unit for leaks while applying pressure to the core. All identified leaking tubes are mechanically sealed. If the number of sealed tubes exceeds the OEM standard for the maximum allowable, a replacement center section is offered in the remanufacturing process. Upon completion of either process, a final pressure check is made. The radiator is then completely dried, painted, cardboard wrapped and skidded for shipment.
GE Oil Cooler
Part Number: 41D728627G2

GE style oil coolers are remanufactured starting with a complete cleaning and visual inspection of the incoming unit. A flush is made of both the oil and water system. All units are disassembled with both elements being cleaned a second time and parts individually inspected. All gasket surfaces are prepared for new gaskets. Bonnets are bead blasted. A pressure check is made on both the oil "side" and on the water "side". Any leaking tubes are mechanically sealed as necessary. Reassembly is completed using new O-rings and gasket. The oil cooler is then painted and skidded for shipment.
EMD Oil Cooler
Part Numbers: 9514842, 9339040, 8250727

EMD style oil coolers are remanufactured starting with a visual inspection of the incoming unit. A flush is made of both the oil and water system and the unit is completely cleaned. All units are disassembled with both elements being cleaned a second time and parts individually inspected. All gasket surfaces are prepared for new gaskets. Tanks are bead blasted. A pressure check is made on both the oil "side" and on the water "side". Any leaking tubes are mechanically sealed as necessary. Reassembly is completed using new O-rings and gasket. The oil cooler is then painted and skidded for shipment.
GE Fuel pre-heater
Part Numbers: 41C619684P2, 41C640369G1

GE fuel pre-heater are remanufactured by first cleaning and visually inspecting the unit for leaks while applying pressure to the core. All identified leaking tubes are mechanically sealed. If the number of sealed tubes exceeds the OEM standard for the maximum allowable number of sealed tubes, a replacement center section is offered in the remanufacturing process. Upon completion of either process, a final pressure check is completed. The fuel pre-heater is then completely dried, painted, wrapped and skidded for shipment.
EMD Fuel pre-heater
Part Number: 9517269

EMD fuel pre-heater are remanufactured by first completely cleaning and visually inspecting the unit for leaks while applying pressure to the core. All identified leaking tubes are mechanically sealed. If the number of sealed tubes exceeds the OEM standard for the maximum allowable number of sealed tubes, a replacement center section is offered in the remanufacturing process. Upon completion of either process, a final pressure check is completed. The fuel pre-heater is then completely dried, painted, wrapped and skidded for shipment.